The manual horizontal test bench is suitable for domestic and imported pointer push-pull force gauges and digital display push-pull force gauges for tensile and compressive load and insertion force testing.
■ Horizontal installation;
■ Manual operation, simple and stable operation;
■ The machine can be installed on the table (table) and used to make the machine more stable.
· Effective travel: 50mm;
· Maximum load: 500N;
· Length × Width × Height: 450 × 190 × 180 mm;
· Net weight: 10.6kg;
· Effective area of test area: 105 × 100 mm, up to 105 × 152mm.
Installation method of dynamometer
1. Remove the mounting strip from the force platform;
2. Connect the mounting bar to the dynamometer mounting hole 4-M3 firmly;
3. Install the mounting bar and dynamometer assembly on the force platform.