ANC digital torque table
You are here: Home » Products » Torque tester series » Torque tester » ANC digital torque table
Share to:

ANC digital torque table

  • 300.00

product description

1,Overview

ANC digital displayTorqueThe table is a matching ratchetwrenchTorque monitoringinstrument,Used for various fasteningsDisassembly controlStrength,haveoperatingsimple,carrylight,Unit conversion,soundInstructions,Forward and backwardAdjustableFeaturesFeatures,widelyApply tocar,bicycle,VariousmechanicalMaintenance etc.industry.

2,FeaturesFeatures

2.1 Error:BidirectionalReading errorClockwise ± 2%, counterclockwise ± 2.5%Forward and reverse applyimproveWork efficiency.

2.2Four kinds of torqueunitfreeSwitch: Kgf.cm, N.m, lbf.ft, lbf.in.

2.3 With sound and light alarmFeaturesBacklight function,Convenienceat nightorinsufficientThe placeoperating.

2.4Three kindsOperating modefreeSwitch:real timeMode, peak mode, preset mode.

2.5 Power2 quarters 7#battery

2.6 AutomaticShutdown:productAutomatic shutdown after 10 minutes of inactivity.

productComponents

【Torque main body】



【liquid crystalDisplay



,Specifications

model

ANC-30

ANC-135

ANC-200

MINIndex value

0.01N.m

0.1N.m

0.1N.m

MAXOperating range

3-30N.m

13.5-135N.m

20-200N.m

Connector

1/2

TorqueAccuracy

Clockwise ± 2%, counterclockwise ± 2.5%

,operatingExplanation

5.1 Boot

Short press \"P / C \" key to turn on the machine. If the battery is insufficient after the start, it will automatically shut down and replace the battery before normal use.

5.2unitSwitch

BootStatus, please press\"U / S \" key, SwitchFour kindsEngineering unit.

5.3 Working mode switch

\"track \" real timemode/ \"peak \" peakmode/ \"pre \" presetmode

A,Real-time mode

Real-time measurement mode follows applied torquevalue,When unloading torque,Torque value automatically reset to zero. LCD screenshown as\"track\"TimeReal-time mode, Please press \"┼ \" to switch the working mode.

B, Peakmode

In peak measurement mode, when torque is applied, the wrench will lock the max and apply torque, and willDisplayed on the LCD screen. When the torque is unloaded, the peak torque will be locked, and when loaded again, the LCD screenLocked peaks will not be updated, You can save the value by pressing \"M \" or clear the value by pressing \"P / C \". The LCD screen shows \"peak \" as the peak mode, please press \"┼ \" to switch the working mode.

C,Preset mode

In preset mode, long press\"\"Key to enterPreset value setting,Then you can press \"┼ \" to increase the target value, or press \"━ \"Decrease the target value. After setting, press \"U / S \" to save and exit. buzzerOpenReach the preset target torque valueTime,buzzerChangmingThe red light stays on.LCD screendisplayPre isPreset mode,Please press \"┼ \" to switch the working mode.

5.4 Clear

When the display shows the force value, press \"P / C \" key to directly reset the force value.

5.5 Datasave

Short press \"M \" on the measurement interface to display \"\"When it means that the save was successful. Display \"\", Means save failed. WhenWhen the force value is zero, it cannot be saved, it will prompt\"\".

5.6 DataView

Press \"P / C \" key to boot orUnder the boot measurement interface, Long press \"M \" key, you can view the saved data, inData viewing interface canPass, \"┼ \" or \"━ \" key,View saved records whenAfter viewing, short press \"M\"Key to exit.

5.7 Datadelete

Press \"P / C \" key to boot orUnder the boot measurement interface, Press and hold \"M \" to displaysavedata,Press \"U / S \" to selectDelete method, \"ALL \"ExpressDelete all at once, \"ONE \"ExpressOne by onedelete. selectFinished, then press\"P / C \" keydeleteconserveddata.

5.8 RecoveryFactory settings

The user can restore the instrument to the factory settings through this function, and long press the\"U / S\" keyTo enter the system menu selection,\"U / S \" keyselect\"RSET \" menuthen\"┼ \" keyChoose number1 or 0. Ifreset,select\"1\"Quickly press \"U / S \" key,Exit system menuproductreset.restoreAfter selecting \"0 \", quickly press the \"U / S \" key,Exit systemMenu

5.9 BuzzerFeatures

Long press \"U / S \" to enterSystem menu,thendog\"U / S \" keyselectGo to \"BUZZ \" option,dog\"┼ \" keyChoose whether to turn on the buzzer. If the buzzer is turned on,select\"1\"Quickly press \"U / S \" key,Exit the system menu, the buzzer hasOpen. IfOpen, select\"0 \" afterShort press\"U / S \" key,Exit system menuJust

5.10 BacklightFeatures

Long press \"U / S \" to enterSystem menu,thendog\"U / S \" keyselectTo \"LTON\"Options,dog\"┼ \" keyChoose whether to openBacklightFeatures. If openBacklightFeatures,select\"1\"Quickly press \"U / S \" key,Exit the system menu, ieBacklight functionOpen. IfOpen, select\"0 \" afterShort press\"U / S \" key,Exit system menuJust

5.11 Low power consumption

Long press \"U / S \" keyEnter the system menu and short press\"U / S \" keyChoose to\"LPOW \" option,dog\"┼ \" key selectionWhether to enable the low power consumption function. If openLow power consumptionFeatures,select\"1\"Quickly press \"U / S \" key,Exit the system menu, ieLow power consumptionOpenIf notOpen, select\"0 \" afterShort press\"U / S \" key,Exit system menuJust

six,maintenanceStore

6.1 Note: In order to maintain good accuracy, it is recommended to recalibrate about once every year.

6.2 Excessive torque may cause damage or loss of accuracy (over max torque range of 105%).

6.3 Do not apply torqueShake violently or drop the torque meter to the ground.

6.4 Do not place the torque meter in high temperature, high humidity, or direct sunlight.

6.5 If you accidentally get the torque gauge wet, wipe it dry with a dry towel immediately.

6.6 Do not stress the LCD screen.

Seven,Random attachment

1

ANCDigital displayTorque table

1

2

7#battery

2

3

Instructions

1 serving

4

Certificate of conformity

1 serving

5

Warranty Card

1 serving

6

Desiccant

1 package

产品表单
Want to know more, contact us further!

Subscription information

Send your email to get more latest product information.

订阅

Quick Links

contact us

our address

Zhiguang Industrial Zone, Liushi Town, Yueqing City, Wenzhou City, Zhejiang Province

No.63 Liule Road, Liushi Town, Yueqing City, Wenzhou City, Zhejiang Province


phone

0577-57151532

0577-57572513 0577- 57575950


e-mail

ruby@tripodinstrument.com