Features
The ALR manual hydraulic testing machine is specially equipped for the HF series push-pull force gauge. It is manually operated and uses a hydraulic jack to achieve a large load test force test. The operation is simple and stable. It can be combined with different fixtures to form different tensile and compressive load testing machines.
specification
|
Maximum load |
5k |
5T |
10T |
20T |
50T |
|
Compression cavity |
200mm |
220mm |
200mm |
145mm |
290mm |
|
Stretching cavity |
150mm |
150mm |
230mm |
270mm |
160mm |
|
Effective itinerary |
90mm |
125mm |
125mm |
145mm |
160mm |
|
Dimensions |
190 × 190 × 840mm |
248 × 248 × 1050mm |
310 × 310 × 1280mm |
310 × 310 × 1350mm |
370 × 370 × 1410mm |
|
net weight |
30kg |
42kg |
92kg |
102kg |
240kg |
note
1. The test stand can be ordered according to the specifications required by the user;
2. The dynamometer in the picture needs to be ordered separately;
3. Please install the sensor, machine and jack in the center when installing. During testing, the direction of tensile and compressive load should be in the center of the machine.
caveat
1. When destroying the test, you should wear protective masks and gloves to prevent splashing substances generated during the test;
2. Do not use damaged or bent fixtures. When using a damaged or bent fixture, it may fall off or break, and the test object may fall. So be very careful not to hurt your body;
3. Do not exceed the rated load range of the push-pull gauge sensor, otherwise the sensor will be damaged, and excessive load may break the sensor and cause an accident.
Schematic
Other supporting instruments
|
equipment name |
model |
equipment name |
model |
|
Digital push-pull force gauge |
HF |
Electric vertical machine |
AEV |
|
Pointer push-pull force gauge |
NK |
Electric single column vertical machine |
AEL |
|
Digital torque tester |
ANL |
Electric horizontal machine |
AEH |
|
Bottle Cap Torque Tester |
ANL-P |
Spiral side roll test machine |
ASC |
|
Pointer torque screwdriver |
ANQ |
Manual horizontal test stand |
AMH |
|
High-speed impact torque tester |
AGN |
Manual vertical and horizontal test stand |
ASL |
|
Dynamic torque tester |
ADN |
Hand-pressed tensile and compression test stand |
AST |
|
Torque wrench tester |
ANJ |
Spiral tension and compression test stand |
ALX |
|
Torsion spring testing machine |
ANH |
Special testing machine for peeling force |
ABL |
|
Spring tension and compression testing machine |
ATH |
Ball pressure test device |
AQY |
|
Shore Rubber Hardness Tester |
LX |
Motorized hydraulic tension and compression test stand |
ALR |
|
Shore Hardness Test Stand |
LAC-J |
Button Tester |
ABQ |
|
Fruit Hardness Tester |
AGY |
Terminal tensile tester |
ADL |
|
Fruit Hardness Tester Stand |
GYJ |
Rope tension meter |
ASZ |
|
Tonometer |
ATN |
Side pressure tension tester |
HD |
